Atari 2600 capacitor list
| Manufacturer | Atari |
|---|---|
| First released | 1977 |
| Boards listed | 3 |
| Capacitors listed | 18 |
Capacitor lists for 3 Atari 2600 boards and power supplies (18 capacitors in total), by board revision.
About this page: the write-up was drafted with the help of AI and may contain mistakes. The capacitor lists are Omar's FabLab's own records. Spotted an error? Let us know.
The Atari 2600 (originally sold as the Video Computer System) is one of the earliest cartridge-based home consoles. Its boards use only a handful of electrolytic capacitors, so a recap is a small job, but after four decades those few caps are often dried out and can cause unstable or noisy video.
How to use this page
Find the board you have by the part number or revision printed on it, then use that board's table. Boards that look alike can need different capacitors. Each table lists how many of each value the board uses, the voltage rating (a higher rating is fine, lower is not) and whether it's a through-hole (THT) or surface-mount (SMD) part. For general tips, see Recapping basics. Other consoles: Capacitor lists.
Main boards and other boards
Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.
2600 (Original, 'Woodgrain') — All Revs
| Qty | Value | Voltage | Type |
|---|---|---|---|
| 2 | 4.7µF | 35V | THT |
| 1 | 2200µF | 16V | THT |
| 1 | 0.1µF NP (film; 25V ceramic disc on early models) | 100V | THT |
| 2 | 820pF NP (polystyrene) | 50V | THT |
2600A — All Revs
| Qty | Value | Voltage | Type |
|---|---|---|---|
| 1 | 4.7µF (not on Rev 16) | 35V | THT |
| 1 | 4.7µF | 35V | THT |
| 1 | 2200µF | 16V | THT |
| 2 | 0.1µF NP (film) | 100V | THT |
2600 Jr (NTSC Junior)
| Qty | Value | Voltage | Type |
|---|---|---|---|
| 1 | 4.7µF | 35V | THT |
| 1 | 2200µF | 16V | THT |
| 2 | 4.7µF (or ceramic 0.22µF some revs) | 35V | THT |
| 1 | 4.7µF (or ceramic 0.1µF some revs) | 35V | THT |
| 2 | 820pF NP (polystyrene) | 50V | THT |