Atari 7800 capacitor list

From FabLab Wiki
Atari 7800 capacitor list
ManufacturerAtari
First released1986
Boards listed1
Capacitors listed3

Capacitor lists for 1 Atari 7800 boards and power supplies (3 capacitors in total), by board revision.

About this page: the write-up was drafted with the help of AI and may contain mistakes. The capacitor lists are Omar's FabLab's own records. Spotted an error? Let us know.

The Atari 7800 ProSystem plays 7800 games and most of the 2600 library. Its NTSC main board has only a couple of electrolytic capacitors to replace.

How to use this page

Find the board you have by the part number or revision printed on it, then use that board's table. Boards that look alike can need different capacitors. Each table lists how many of each value the board uses, the voltage rating (a higher rating is fine, lower is not) and whether it's a through-hole (THT) or surface-mount (SMD) part. For general tips, see Recapping basics. Other consoles: Capacitor lists.

Main boards and other boards

Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.

NTSC Main Board (C025231-001 Rev A)

QtyValueVoltageType
2220µF (6.3V OK)16VTHT
12200µF16VTHT