Nintendo Entertainment System (NES) capacitor list
From FabLab Wiki
Nintendo Entertainment System (NES) capacitor list| Manufacturer | Nintendo |
|---|
| First released | 1985 (North America) |
|---|
| Boards listed | 10 |
|---|
| Capacitors listed | 53 |
|---|
Capacitor lists for 10 Nintendo Entertainment System (NES) boards and power supplies (53 capacitors in total), by board revision.
About this page: the write-up was drafted with the help of AI and may contain mistakes. The capacitor lists are Omar's FabLab's own records. Spotted an error? Let us know.
The NES front-loader (NES-001) and the later top-loader (NES-101) are generally robust, but their electrolytic capacitors are now decades old. This page lists the main boards and the internal power supply boards recorded on the bench.
How to use this page
Find the board you have by the part number or revision printed on it, then use that board's table. Boards that look alike can need different capacitors. Each table lists how many of each value the board uses, the voltage rating (a higher rating is fine, lower is not) and whether it's a through-hole (THT) or surface-mount (SMD) part. For general tips, see Recapping basics. Other consoles: Capacitor lists.
Main boards and other boards
Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.
NES-001 (Frontloader) — Main PCB
| Qty | Value | Voltage | Type |
|---|
| 1 | 100µF | 6.3V | THT |
| 1 | 2.2µF | 50V | THT |
| 1 | 1µF | 50V | THT |
NES-101 (Toploader) — NESN-CPU-01
| Qty | Value | Voltage | Type |
|---|
| 1 | 100µF | 6.3V | THT |
| 2 | 1µF | 50V | THT |
| 1 | 0.47µF NP | 50V | THT |
| 1 | 1500µF (silkscreened 1000µF) | 25V | THT |
Power supplies
Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.
NES-001 PSU — Alps Green PCB (floating cap)
| Qty | Value | Voltage | Type |
|---|
| 3 | 1µF | 50V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 6.3V | THT |
NES-001 PSU — Alps Brown PCB (Diode Bridge)
| Qty | Value | Voltage | Type |
|---|
| 1 | 10µF (25V OK) | 35V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 10V | THT |
| 1 | 10µF | 35V | THT |
| 1 | 1µF | 50V | THT |
NES-001 PSU — Alps FR853
| Qty | Value | Voltage | Type |
|---|
| 1 | 10µF (PAL only) | 16V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 10V | THT |
| 1 | 100µF | 25V | THT |
| 2 | 1µF | 50V | THT |
| 1 | 10µF | 16V | THT |
NES-001 PSU — Alps SH-SH5 / FS074
| Qty | Value | Voltage | Type |
|---|
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 10V | THT |
| 1 | 100µF | 25V | THT |
| 2 | 1µF | 50V | THT |
| 1 | 10µF | 16V | THT |
NES-001 PSU — Alps R22 / France RGB (ref. only, not in std. kit)
| Qty | Value | Voltage | Type |
|---|
| 2 | 10µF | 16V | THT |
| 1 | 22µF | 16V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 16V | THT |
| 2 | 10µF | 25V | THT |
| 1 | 100µF | 10V | THT |
NES-001 PSU — Mitsumi TDK-T12V
| Qty | Value | Voltage | Type |
|---|
| 3 | 10µF | 16V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 16V | THT |
| 1 | 100µF | 25V | THT |
NES-001 PSU — Mitsumi MTM-8V-0 / VIX
| Qty | Value | Voltage | Type |
|---|
| 1 | 10µF (25V OK) | 35V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 16V | THT |
| 1 | 100µF | 10V | THT |
NES-001 PSU — Mitsumi TDK-T31V
| Qty | Value | Voltage | Type |
|---|
| 1 | 10µF | 16V | THT |
| 1 | 2200µF | 25V | THT |
| 1 | 100µF | 16V | THT |
| 1 | 100µF | 10V | THT |