Sega Dreamcast capacitor list
From FabLab Wiki
Sega Dreamcast capacitor list| Manufacturer | Sega |
|---|
| First released | 1998 (Japan) |
|---|
| Boards listed | 10 |
|---|
| Capacitors listed | 103 |
|---|
Capacitor lists for 10 Sega Dreamcast boards and power supplies (103 capacitors in total), by board revision.
About this page: the write-up was drafted with the help of AI and may contain mistakes. The capacitor lists are Omar's FabLab's own records. Spotted an error? Let us know.
The Dreamcast's power supply and GD-ROM drive are the usual suspects as the console ages. This page lists the logic boards, the 110V and 220-240V power supplies, the GD-ROM optical boards and the controller interface board.
How to use this page
Find the board you have by the part number or revision printed on it, then use that board's table. Boards that look alike can need different capacitors. Each table lists how many of each value the board uses, the voltage rating (a higher rating is fine, lower is not) and whether it's a through-hole (THT) or surface-mount (SMD) part. For general tips, see Recapping basics. Other consoles: Capacitor lists.
Main boards and other boards
Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.
Controller Interface / Battery Board
| Qty | Value | Voltage | Type |
|---|
| 1 | 47µF | 16V | SMD |
VA0 Logic Board
| Qty | Value | Voltage | Type |
|---|
| 1 | 100µF | 6.3V | SMD |
| 2 | 10µF | 16V | SMD |
| 2 | 10µF BP | 10V | SMD |
| 1 | 220µF | 6.3V | SMD |
| 2 | 22µF | 6.3V | SMD |
| 1 | 4.7µF | 35V | SMD |
| 1 | 47µF | 16V | SMD |
| 1 | 47µF | 25V | SMD |
VA1 Logic Board
| Qty | Value | Voltage | Type |
|---|
| 1 | 100µF | 16V | SMD |
| 1 | 100µF | 6.3V | SMD |
| 3 | 10µF | 16V | SMD |
| 2 | 10µF BP | 10V | SMD |
| 1 | 220µF | 6.3V | SMD |
| 2 | 22µF | 6.3V | SMD |
| 1 | 4.7µF | 35V | SMD |
| 2 | 47µF | 16V | SMD |
| 1 | 47µF | 25V | SMD |
| 1 | 47µF | 6.3V | SMD |
VA2.1 Logic Board
| Qty | Value | Voltage | Type |
|---|
| 5 | 100µF | 16V | SMD |
| 3 | 100µF | 6.3V | SMD |
| 3 | 10µF | 16V | SMD |
| 2 | 10µF BP | 10V | SMD |
| 1 | 220µF | 6.3V | SMD |
| 2 | 22µF | 6.3V | SMD |
| 1 | 4.7µF | 35V | SMD |
| 2 | 47µF | 16V | SMD |
| 1 | 47µF | 25V | SMD |
| 4 | 47µF | 6.3V | SMD |
Power supplies
Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.
PSU 110V (171-7874A/-A-X1/-7874B)
| Qty | Value | Voltage | Type |
|---|
| 1 | 1000µF | 25V | THT |
| 1 | 100µF | 200V | THT |
| 1 | 1500µF | 6.3V | THT |
| 2 | 2200µF | 10V | THT |
| 1 | 220µF | 25V | THT |
| 1 | 470µF | 10V | THT |
| 1 | 47µF | 35V | THT |
PSU 110V (171-7874B-X2/171-7962A/-7962A-X1/171-7970A/-7970A-X2)
| Qty | Value | Voltage | Type |
|---|
| 1 | 1000µF | 10V | THT |
| 1 | 100µF | 200V | THT |
| 1 | 2200µF | 10V | THT |
| 1 | 3300µF | 10V | THT |
| 1 | 470µF | 10V | THT |
| 1 | 470µF | 16V | THT |
| 1 | 470µF | 35V | THT |
| 1 | 47µF | 35V | THT |
PSU 220-240V (171-7960A / PWR UNIT PANA EU V01 / ETXSE239E2C)
| Qty | Value | Voltage | Type |
|---|
| 2 | 1000µF | 25V | THT |
| 1 | 1200µF | 10V | THT |
| 2 | 1800µF | 16V | THT |
| 1 | 470µF | 16V | THT |
| 1 | 47µF | 400V | THT |
Disc drives
Capacitor lists from Omar's FabLab's bench records (Caps_Per_Device V6). Not AI-generated.
GD-ROM Optical Board (171-8129A)
| Qty | Value | Voltage | Type |
|---|
| 2 | 100µF | 16V | SMD |
| 6 | 100µF | 6.3V | SMD |
| 3 | 47µF | 6.3V | SMD |
GD-ROM Optical Board (XU937)
| Qty | Value | Voltage | Type |
|---|
| 2 | 100µF | 16V | SMD |
| 5 | 100µF | 6.3V | SMD |
| 1 | 47µF | 6.3V | SMD |
GD-ROM Optical Board (XV779 / KS-7S)
| Qty | Value | Voltage | Type |
|---|
| 2 | 100µF | 16V | SMD |
| 5 | 100µF | 6.3V | SMD |
| 3 | 47µF | 6.3V | SMD |